How To Create Gauges in CSS

With modern CSS we can create beautiful gauges with ease. It involves a bunch of techniques, so let's break it down and get started! First, we create a 3x3 grid. We then add an element that covers the entire grid and is a full circle: host::part(gauge) { background: background: conic-gradient(/* colors /); border-radius: 50%; grid-area: 1 / 1 / 4 / 4; } Next, we add a starting degree for the min position of the gauge, and how many degrees until the max position: :host { --analog-gauge-start-angle: 235deg; --analog-gauge-range: 250deg; } Adding these to our gauge-part: :host::part(gauge) { --analog-gauge-bg: #009, #69f, #ff0, #f90, #f00 var(--analog-gauge-range), #0000 0 var(--analog-gauge-range); background: conic-gradient(from var(--analog-gauge-start-angle, 235deg), var(--analog-gauge-bg)); } And we get: What just happened? We changed the starting point of the gradient to where we want to place the min-label. We then added the length of the range using --analog-gauge-range), and after that point, we simply insert a transparent (#0000) color. Next, let's add a circular mask to cut off the inner part of the circle — we control the width with a custom property, --analog-gauge-bdw: :host { --analog-gauge-mask-circle: radial-gradient(circle at 50% 50%, #0000 calc(50cqi - var(--analog-gauge-bdw, 10cqi)), #000 0); } Let's add this to our gauge-part: :host::part(gauge) { mask: var(--analog-gauge-mask-circle), var(--analog-gauge-mask-segment, none); mask-composite: var(--analog-gauge-mask-composite, subtract); } We'll get back to the segment-mask later! Now we have: Needle in a haystack Next up is the gauge needle. It's two grid cells wide: :host::part(needle) { align-self: center; grid-area: 2 / 1 / 3 / 3; height: var(--analog-gauge-needle-h); } Let's add a circular mask to the point in the needle matching the absolute middle of our grid, and adjust the transform-origin of the needle to match that: :host { -_m: calc(100cqi/6); } :host::part(needle) { mask: radial-gradient(circle at calc(100% - var(--_m)) 50%, #0000 0 2.5cqi, #FFF 2.5cqi); transform-origin: calc(100% - var(--_m)) 50%; } And we get: The --_m variable is 1/6th of the circle width (100cqi), and thus the middle of a grid cell. Next, let's add a fancy clip-path to make it look like a gauge needle: :host::part(needle) { clip-path: polygon(7.5% 50%,78% 0%,83% 35%,83% 65%,78% 100%); } I made a clip-path editor if you want to make your own needle! Labels The labels are added in the last row of grid cells, and are again placed using grid-area: :host::part(label-min) { grid-area: 3 / 1 / 4 / 2; } :host::part(label-max) { grid-area: 3 / 3 / 4 / 4; } Value Marks For the value marks, we add an inner circle. This circle is the full width of the main circle minus the width of the gauge: :host::part(value-marks) { aspect-ratio: 1; border-radius: 50%; grid-area: 1 / 1 / 4 / 4; place-self: center; width: calc(100cqi - (2 var(--analog-gauge-bdw, 10cqi))); } The marks themselves are placed like on an analog clock. Here's what we've got now (I've added a grey background for clarity): Segments Remember the empty segment-mask we added earlier? Let's add that so we have an easy way to segmentize the gauge-gradient: :host { --analog-gauge-segments: 10; --analog-gauge-mask-segment: repeating-conic-gradient( from var(--analog-gauge-start-angle, 235deg) at 50% 50%, #000 0 var(--analog-gauge-segments-w, 1deg), #0000 0 calc((var(--analog-gauge-range, 250deg) / var(--analog-gauge-segments, 5)))); } Phew! That requires some explanation! Let's break it down: We create a mask at the same angle as the main gradient. The --analog-gauge-segments variable sets how many segments to divide the gauge into (default is 10). Setting it to 1 gives us a single segment - returning to our original solid gradient. The repeating pattern creates thin black lines (#000) with width of --analog-gauge-segments-w (default is 1deg). Between these lines, we have transparent areas (#0000). The size of each segment is calculated by dividing the total range (--analog-gauge-range) by the number of segments. When combined with our previous mask using mask-composite: subtract, these black lines create visible separations in our gauge. And ... we're done! Let's remove the grid-preview and see the final gauge: Variations Let's create a bunch of variations by simply modifying the CSS custom properties. Humidity .humidity { --analog-gauge-bg: #8cf, #6bf, #46e, #24c var(--analog-gauge-range), #0000 0 var(--analog-gauge-range); --analog-gauge-start-angle: 270deg; --analog-gauge-range: 220deg; --analog-gauge-segments: 100; --analog-gauge-values-bg: linear-gradient( 210de

Apr 5, 2025 - 13:04

With modern CSS we can create beautiful gauges with ease. It involves a bunch of techniques, so let's break it down and get started!

First, we create a 3x3 grid. We then add an element that covers the entire grid and is a full circle:

host::part(gauge) {
  background: background: conic-gradient(/* colors */);
  border-radius: 50%;
  grid-area: 1 / 1 / 4 / 4;
}

Next, we add a starting degree for the min position of the gauge, and how many degrees until the max position:

:host {
  --analog-gauge-start-angle: 235deg;
  --analog-gauge-range: 250deg; 
}

Adding these to our gauge-part:

:host::part(gauge) {
  --analog-gauge-bg:
    #009, #69f, #ff0, #f90, #f00 var(--analog-gauge-range),
    #0000 0 var(--analog-gauge-range);

background:
  conic-gradient(from var(--analog-gauge-start-angle, 235deg), 
  var(--analog-gauge-bg));
}

And we get:

What just happened? We changed the starting point of the gradient to where we want to place the min-label. We then added the length of the range using --analog-gauge-range), and after that point, we simply insert a transparent (#0000) color.

Next, let's add a circular mask to cut off the inner part of the circle — we control the width with a custom property, --analog-gauge-bdw:

:host {
  --analog-gauge-mask-circle:
    radial-gradient(circle at 50% 50%,
    #0000 calc(50cqi - var(--analog-gauge-bdw, 10cqi)),
    #000 0);
}

Let's add this to our gauge-part:

:host::part(gauge) {
  mask:
    var(--analog-gauge-mask-circle),
    var(--analog-gauge-mask-segment, none);
  mask-composite:
    var(--analog-gauge-mask-composite, subtract);
}

We'll get back to the segment-mask later! Now we have:

Needle in a haystack

Next up is the gauge needle. It's two grid cells wide:

:host::part(needle) {
  align-self: center;
  grid-area: 2 / 1 / 3 / 3;
  height: var(--analog-gauge-needle-h);
}

Let's add a circular mask to the point in the needle matching the absolute middle of our grid, and adjust the transform-origin of the needle to match that:

:host {
  -_m: calc(100cqi/6);
}
:host::part(needle) {
  mask:
    radial-gradient(circle at calc(100% - var(--_m)) 50%,
    #0000 0 2.5cqi, #FFF 2.5cqi);
  transform-origin: calc(100% - var(--_m)) 50%;
}

And we get:

The --_m variable is 1/6th of the circle width (100cqi), and thus the middle of a grid cell.

Next, let's add a fancy clip-path to make it look like a gauge needle:

:host::part(needle) {
  clip-path: polygon(7.5% 50%,78% 0%,83% 35%,83% 65%,78% 100%);
}

I made a clip-path editor if you want to make your own needle!

Labels

The labels are added in the last row of grid cells, and are again placed using grid-area:

:host::part(label-min) {
  grid-area: 3 / 1 / 4 / 2;
}
:host::part(label-max) {
  grid-area: 3 / 3 / 4 / 4;
}

Value Marks

For the value marks, we add an inner circle. This circle is the full width of the main circle minus the width of the gauge:

:host::part(value-marks) {
  aspect-ratio: 1;
  border-radius: 50%;
  grid-area: 1 / 1 / 4 / 4;
  place-self: center;
  width: calc(100cqi - (2 * 
    var(--analog-gauge-bdw, 10cqi)));
}

The marks themselves are placed like on an analog clock.

Here's what we've got now (I've added a grey background for clarity):

Segments

Remember the empty segment-mask we added earlier? Let's add that so we have an easy way to segmentize the gauge-gradient:

:host {
  --analog-gauge-segments: 10;
  --analog-gauge-mask-segment:
    repeating-conic-gradient(
      from var(--analog-gauge-start-angle, 235deg) at 50% 50%,
      #000 0 var(--analog-gauge-segments-w, 1deg),
      #0000 0 calc((var(--analog-gauge-range, 250deg) /
      var(--analog-gauge-segments, 5))));
}

Phew! That requires some explanation! Let's break it down:

We create a mask at the same angle as the main gradient.
The --analog-gauge-segments variable sets how many segments to divide the gauge into (default is 10). Setting it to 1 gives us a single segment - returning to our original solid gradient.
The repeating pattern creates thin black lines (#000) with width of --analog-gauge-segments-w (default is 1deg).
Between these lines, we have transparent areas (#0000).
The size of each segment is calculated by dividing the total range (--analog-gauge-range) by the number of segments.
When combined with our previous mask using mask-composite: subtract, these black lines create visible separations in our gauge.

And ... we're done! Let's remove the grid-preview and see the final gauge:

Variations

Let's create a bunch of variations by simply modifying the CSS custom properties.

Humidity

.humidity {
  --analog-gauge-bg: #8cf, #6bf, #46e, #24c var(--analog-gauge-range),
    #0000 0 var(--analog-gauge-range);
  --analog-gauge-start-angle: 270deg;
  --analog-gauge-range: 220deg;
  --analog-gauge-segments: 100;
  --analog-gauge-values-bg: linear-gradient(
    210deg,
    light-dark(#abd7f9, #1e1b40),
    light-dark(#fff, #333),
    #0000 85%
  );
}

Here, we change the starting degree, add a gradient background to the value-marks and segmentize it heavily:

Download Speed

Here, we create a variation of the needle, and add a different color after the current value:

.download-speed {
  --analog-gauge-bg: #12c2fc, #6cffd4,
    #78ff80 var(--analog-gauge-value, 0%),
    light-dark(#ddd, #222) 0 var(--analog-gauge-range),
    #0000 0 var(--analog-gauge-range);
  --analog-gauge-needle-bg: light-dark(#445, #ccc);
  --analog-gauge-needle-cp: polygon(
    20% 35%,
    80% 0%,
    83% 35%,
    83% 65%,
    80% 100%,
    20% 65%
  );
  --analog-gauge-segments: 10;
}

UV Index

Next, let's create a gradient with solid stops and a larger gauge-size:

.uv {
  --_dg: calc(var(--analog-gauge-range) / var(--analog-gauge-segments));
  --analog-gauge-bdw: 25cqi;
  --analog-gauge-bg: 
    #55AF33 var(--_dg), 
    #A0C61B 0 calc(2 * var(--_dg)), 
    #F7E98E 0 calc(3 * var(--_dg)), 
    #F6E301 0 calc(4 * var(--_dg)), 
    #FAB60D 0 calc(5 * var(--_dg)), 
    #F88D2F 0 calc(6 * var(--_dg)), 
    #F76D00 0 calc(7 * var(--_dg)), 
    #E53015 0 calc(8 * var(--_dg)), 
    #D90E21 0 calc(9 * var(--_dg)), 
    #D80010 0 calc(10 * var(--_dg)), 
    #8A4F9E 0 var(--analog-gauge-range), 
    #0000 0 var(--analog-gauge-range);
  --analog-gauge-segments: 11;
}

Web Component

I've wrapped all the logic in an easy-to-use web component:

npm i @browser.style/analog-gauge

Basic Usage

Import the component in your JavaScript:

import "@browser.style/analog-gauge";

Add the component to your HTML:


 value="50" min="0" max="100">


 
  value="1032" 
  label="hPa" 
  min="950" 
  max="1050" 
  min-label="Low" 
  max-label="High"
  values="11">

Supported Attributes

The component accepts these attributes:

value: Current value (number)
min: Minimum value (default: 0)
max: Maximum value (default: 100)
suffix: Text to append after value (e.g., "%", "°")
label: Main label text
min-label: Label for minimum value
max-label: Label for maximum value
values: Specify value markers in two formats:
- A single number (e.g., "11") to generate evenly spaced markers
- A comma-separated list (e.g., "Low,Mid,High") for custom labels

Demo

You can see a demo of the web component at browser.style/ui/analog-gauge or at CodePen: